- Two barrel lengths provide selectable polar pattern and operating distance
- Frequency response 20Hz~18kHz
- Powered from AKG 480B screw-on PSU
- Combined dimensions with PSU WxDxH 21mmØ x643mm
- Combined weight with PSU 270g
AKG C480BPreamp Module for the Ultra Linear Series Capsules
- Selectable gain stages 0db -10dB or +6dB
- Selectable high-pass filter 70Hz or 100Hz
- Powered from 48V phantom powering source
- Dimensions WxDxH 21mmØ x173mm
- Weight 100g
- Large format 25mm gold-sputtered mylar dual diaphragm
- 9 switchable polar patterns ranginf between omnidirectional, wide cardioid, cardioid, hypercardioid, & figure-8
- Frequency response 20Hz~20kHz
- Maximum SPL 140dB@0.5%THD
- Peak hold LED displays overload
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Compatible with wide range of AKG lapel and head-worn microphones
- Auto setup mode finds an interference-free channel, and transmits frequency data to transmitter via infrared
- 12 channels may be used simultaneously in each sub-band
- Transmitter battery status displays on the receiver
- Comprising
- AKG SR470 UHF diversity wireless receiver
- AKG PT470 UHF bodypack transmitter
- AKG C544L headworn condenser microphone
- Compatible with wide range of AKG lapel and head-worn microphones
- Auto setup mode finds an interference-free channel, and transmits frequency data to transmitter via infrared
- 12 channels may be used simultaneously in each sub-band
- Transmitter battery status displays on the receiver
- Comprising
- Compatible with wide range of AKG lapel and head-worn microphones
- Auto setup mode finds an interference-free channel, and transmits frequency data to transmitter via infrared
- 12 channels may be used simultaneously in each sub-band
- Transmitter battery status displays on the receiver
- Comprising
- AKG SR470 UHF diversity wireless receiver
- AKG PT470 UHF bodypack transmitter
- AKG MKGL Jack~TA3F Instrument Lead
- Auto setup mode finds an interference-free channel, and transmits frequency data to transmitter via infrared
- 12 channels may be used simultaneously in each sub-band
- Transmitter battery status displays on the receiver
- Comprising
- AKG SR470 UHF diversity wireless receiver
- AKG HT470-D5 UHF wireless microphone transmitter
- Frequency response 20Hz~20kHz
- Polar pattern cardioid
- Switchable low-frequency filter 160Hz 6db/oct
- Switchable pad -20dB
- Dimensions WxHxD 54x160x43mm
- Weight 290g

- Gooseneck attached to shock-mount base
- Frequency response 70Hz~18kHz
- Polar pattern cardioid 120°
- LED status indicator
- Integrated 9~52V phantom power adaptor with XLR-3-M connector
- Length 300mm
- Weight 950g
AKG GN50EGooseneck Module for CK series capsules
- LED ring status indicator
- Integrated 9~52V phantom adaptor with XLR3 connector
- Jumper selectable 250Hz bass rolloff filter
- Dimension 20mmØx572mm
- Weight 160g
AKG GN50Gooseneck Module for CK series capsules
- 3/8" internal thread for permanent installation
- LED ring status indicator
- External in-line 9~52V phantom power adapter with attached XLR3 connector
- Jumper selectable 250Hz bass rolloff filter
- Dimension 20mmØx500mm
- Weight 120g
- Polar pattern selectable cardioid or hypercardioid
- Frequency response 50Hz~20kHz
- Maximum SPL 137dB@1%THD
- Phantom power or 9v battery
- On/off switch with LED
- Selectable 5kHz~9kHz presence boost adapter
- Includes carrying case, stand adaptor, & windscreen
- Dimensions WxDxH 34mmØ x229mm
- Weight 320g
- Polar pattern omnidirectional
- Frequency response 20Hz~20kHz
- Maximum SPL 126db
- Attached 3m lead with with XLRM connector compatible with 9-52V phantom power

- Designed for permanent installation of gooseneck modules
- Durable low profile plastic shell with a flexible inner rubber boot provides up to 20dB attenuation of structure-borne noise
- Included A608 locking clutch which grips the narrow section of the gooseneck and allows for height adjustments
- Mounting hole 53mmØ
- Dimensions WxHxD 69mmØ x31mm
- Polar pattern omnidirectional
- Frequency response 20Hz~20kHz
- Maximum SPL 126db
- Available in black or beige colour
- Attached 1.5m lead with with TA3F connector compatible with AKG MPAVL phantom power adaptor and AKG wireless transmitters
- Weight 68g

- Auto setup mode finds an interference-free channel, and transmits frequency data to transmitter via infrared
- 12 channels may be used simultaneously in each sub-band
- Transmitter battery status displays on the receiver
- Polar pattern omnidirectional
- Frequency range 20Hz~20kHz
- Max SPL 130dB @1kHz
- Switchable 150Hz high pass filter
- Attached 3m lead with XLR connector
- Phantom power 9~52V
- Dimensions WxDxH 80mmØx5mm
- Weight 56g
- Polar pattern cardioid
- Frequency range 150Hz~18kHz
- Attached 1.6m lead with with TA3F connector compatible with AKG wireless transmitters
- Dimensions WxDxH 8mmØ x23mm
- Weight 2.5g

- 2/3" diameter diaphragm
- Polar pattern cardioid
- Frequency response 20Hz~20kHz
- Maximum SPL 150dB
- Switchable HPF @300Hz 6dB/octave
- Switchable pre attenuator -20dB
- Dimension WxHxD 54Øx165mm
- Weight 455g
- Durable layered screen
- Adjustable gooseneck and mic stand clamp
- Panel mount connector for gooseneck microphones
- Integrated XLR-3F connector
- Integrated locking clamp
- 12v power supply for powering condenser microphones
- Single AAA size 1.5-V battery will last up to 30hrs
- XLF input socket
- XLR output socket
- 18v power supply for powering condenser microphones
- 2x9v alkaline battery will last up to 100hrs
- XLR output socket
- 9v power supply for powering L-series microphones
- Volume and balance control for mixing 2 microphones
- 9v alkaline battery will last up to 50hrs
- XLR output socket
- 9v power supply for powering L-series microphones
- Volume and balance control for mixing 2 microphones
- 9v alkaline battery will last up to 50hrs
- XLR output socket
- 9V Battery power supply for 2x MicroMic Series microphones
- Audio input on 2x ⅛ TRS mini-jack sockets
- Mixed audio output on 1x ¼ TRS jack socket
- Output level and audio balance controls
- Matched pair for stereo recording
- Frequency response 20Hz~20kHz
- Polar pattern cardioid
- Switchable low-frequency filter 160Hz 6db/oct
- Switchable pad -20dB
- Dimensions WxHxD 54x160x43mm
- Weight 290g

- Polar pattern hypercardioid
- Frequency range 150Hz~15kHz
- Max SPL 115dB @1kHz
- Phantom power 9~52V on XLR connector
- Dimensions 43x24x15mm
- Weight 5.5g
- Data Sheet in .pdf format (361kB)
- Electret condenser on flexible gooseneck
- Polar pattern hypercardiod
- Frequency response 20Hz~20kHz
- Secure clamp that does not mark instrument
- TA4F connector terminated on 2m lead
- Weight 45g
- Condenser transducer in sealed enclosure picks up vibrations from stringed instruments
- Polar pattern figure-of-eight
- Frequency response 10Hz~18kHz
- Attached 1.5m lead with with TA3F connector compatible with AKG MPAVL phantom power adaptor and AKG wireless transmitters
- Weight 18g
- Condenser transducer in sealed enclosure picks up vibrations from stringed instruments
- Polar pattern figure-of-eight
- Frequency response 10Hz~18kHz
- Attached 3m lead with with XLRM connector compatible with 9-52V phantom power
- Weight 98g
- Large format 25mm gold-sputtered mylar dual diaphragm
- 4 switchable polar patterns cardioid, hypercardioid, omnidirectional & figure-8
- Maximum SPL 140dB@0.5%THD
- Frequency response 20Hz~20kHz
- Response rise above 3kHz emulates the legendary AKG C12
- Switchable low-frequency filter @75Hz & 150Hz
- Switchable pad -10dB, -20dB
- Dimensions HxWxD 141x45x35mm
- Weight 310g
- Includes elastic shock-mount & windscreen
- Large format 25mm gold-sputtered mylar dual diaphragm
- 4 switchable polar patterns cardioid, hypercardioid, omnidirectional & figure-8
- Maximum SPL 140dB@0.5%THD
- Frequency response 20Hz~20kHz
- Switchable low-frequency filter @75Hz & 150Hz
- Switchable pad -10dB, -20dB
- Dimensions HxWxD 141x45x35mm
- Weight 320g
- Includes elastic shock-mount & windscreen
- Large format 25mm gold-sputtered mylar dual diaphragm
- 5 switchable polar patterns cardioid, wide cardioid, hypercardioid, omnidirectional & figure-8
- Frequency response 20Hz~20kHz
- Response rise above 3kHz emulates the legendary AKG C12
- Maximum SPL 140dB@0.5%THD
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Large format 25mm gold-sputtered mylar dual diaphragm
- 5 switchable polar patterns cardioid, wide cardioid, hypercardioid, omnidirectional & figure-8
- Frequency response 20Hz~20kHz
- Maximum SPL 140dB@0.5%THD
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Large format gold-mylar dual diaphragm
- 4 switchable polar patterns cardioid, hypercardioid, omnidirectional & figure-8
- Frequency response 20Hz~20kHz
- Maximum SPL 138dB@0.5%THD
- Switchable low-frequency filter @75Hz & 150Hz
- Switchable pad -10dB, -20dB
- Weight 360g
- Large format gold-mylar dual diaphragm
- 4 switchable polar patterns cardioid, hypercardioid, omnidirectional & figure-8
- Switchable pad -10dB
- AKG C414 E-comb fitted with XLR connector
- AKG C414 C-comb fitted with DIN connector
- Large format 25mm gold-sputtered mylar dual diaphragm
- 9 switchable polar patterns ranginf between omnidirectional, wide cardioid, cardioid, hypercardioid, & figure-8
- Frequency response 20Hz~20kHz
- Response rise above 3kHz emulates the legendary AKG C12
- Maximum SPL 140dB@0.5%THD
- Peak hold LED displays overload
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Large format 25mm gold-sputtered mylar dual diaphragm
- 9 switchable polar patterns ranginf between omnidirectional, wide cardioid, cardioid, hypercardioid, & figure-8
- Frequency response 20Hz~20kHz
- Response rise above 3kHz emulates the legendary AKG C12
- Maximum SPL 140dB@0.5%THD
- Peak hold LED displays overload
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Large format 25mm gold-sputtered mylar dual diaphragm
- 5 switchable polar patterns cardioid, wide cardioid, hypercardioid, omnidirectional & figure-8
- Frequency response 20Hz~20kHz
- Maximum SPL 140dB@0.5%THD
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Large format 25mm gold-sputtered mylar dual diaphragm
- 5 switchable polar patterns cardioid, wide cardioid, hypercardioid, omnidirectional & figure-8
- Frequency response 20Hz~20kHz
- Maximum SPL 140dB@0.5%THD
- Switchable low-frequency filter 12dB/octave @ 40Hz & 80Hz, 6dB/octave @ 160Hz
- Switchable pad -6dB, -12dB, -18dB
- Dimensions HxWxD 160x50x38mm
- Weight 300g
- Includes carrying case, elastic shock-mount, windscreen & pop-filter
- Hypercardioid Condenser design
- Gooseneck clips onto the bell of a trumpet, saxophone, trombone or tuba, providing freedom of movement
- Natural sound is retained by a flat response with a gentle high frequency peak
- Hypercardioid Condenser design
- Gooseneck clips onto the bell of a trumpet, saxophone, trombone or tuba, providing freedom of movement
- Natural sound is retained by a flat response with a gentle high frequency peak
- Cardioid condenser design
- Frequency response 20Hz~20kHz
- Maximum SPL 126db@1%THD
- Shock mount gooseneck for high mechanical-noise rejection & precise positioning
- Resistant to moisture, perspiration, and salts
- Response tailored to cymbal & overhead miking
- Polar pattern cardioid
- Frequency response 20Hz~20kHz
- Max SPL 126dB @1%THD
- Battery or 9~52V phantom power
- Omnidirectional condenser design
- Flat frequency response 20Hz~20kHz
- Maximum SPL 133db@1%THD
- Dual-diaphragm transducer for suppression of cable noise
- Resistant to moisture, perspiration, and salts
- Cardioid condenser transducer
- Resistant to moisture, perspiration, and salts
- Shock mount gooseneck
- Frequency response 80Hz~20kHz
- Maximum SPL 126db@1%THD
- Attached lead with with TA3F connector, compatible with AKG wireless transmitters
- Dimensions 145x70x110mm
- Weight 30g

50/161 records
sql_findeqxr qvalues =
mysql_findeqxr: SELECT * FROM stock LEFT JOIN category AS category ON stock.category = category.recnum WHERE LOWER(stock.manuf) = 'akg' AND (stock.sell is NULL OR stock.sell >= 0) AND stock.image >'' ORDER BY stock.sell DESC, stock.partid ASC LIMIT 5500